Build a Gas Fired Smelting Furnace.
With this small furnace you can melt down aluminum, brass, copper; preheat small, thick pieces of iron and steel for brazing or forging; caseharden soft steel; make up alloys and bake vitreous enamels on metals.
Item # 10 - 7 - 1 Cost >>$3.00 S & H *** U.S.A. >> $2.00
More Info OR,
Build a Band Grinder.
Anyone who can screw pipe fittings together can build this versatile workshop tool in a couple of evenings.
Item # 10 - 7 - 2 Cost >>$1.50 S & H *** U.S.A. >> $2.00
More Info OR,
Build a Band Sander for your Bench Saw.
Without the cost of clutter of an extra stand and motor, you can add a flexible band sander to your shop simply by making this attachment for your bench saw.
Item # 10 - 7 - 3 Cost >>$1.50 S & H *** U.S.A. >> $2.00
More Info OR,
Ballistics Chronograph - A/K/A Bullet Speed Calculator
A reasonably accurate ballistics chronograph is easier to make than most people think.
A rotating drum ( of known speed ) of paper through which the fired projectile passes and the formula for determining that velocity is all that is needed. These plans provide the method for both.
Item # 10 - 7 - 4 Cost >>$3.00 S & H *** U.S.A. >> $2.00
More Info OR,
Gang Tumbler
Work four different materials at once - or charge the four containers with various types of burnishing or polishing abrasives to handle one products' various stages.
Three pages ( 2 sheets - front on first, front & back on other sheet )
Item # 10 - 7 - 5 Cost >>$2.00 S & H *** U.S.A. >> $2.00
More Info OR,
Abrasive Cutoff Wheel
You can cut through steel with this portable abrasive cutoff saw in a fraction of the the time it takes with a hacksaw.
Four pages ( 3 sheets - front on first and last, front & back on other sheet ).
Item # 10 - 7 - 6 Cost >>$2.00 S & H *** U.S.A. >> $2.00
More Info OR,
Lathe Taper Attachment
You can make one from stock materials. It will fit nearly all small lathes.
This taper attachment was made to fit a 9 inch lathe.
Five pages ( 3 sheets - front on first sheet, front and back the other two sheets ).
Item # 10 - 7 - 7 Cost >>$2.00 S & H *** U.S.A. >> $2.00
More Info OR,
Toolpost Grinder For Your Metal Lathe
The frame of this toolpost grinder is made from ordinary steel pipe fittings. If care is used in selecting, machining and assembling the parts, it will do very accurate work which is acceptable for all practical purposes.
Four pages ( 3 sheets - front on first and third sheet, front and back on second sheet ).
Item # 10 - 7 - 8 Cost >>$3.00 S & H *** U.S.A. >> $2.00
More Info OR,
Headstock Brake for your Lathe
Why wait for the spindle to coast to a stop when you can hasten the stopping with a headstock brake.
Four pages ( 3 sheets - front on first and third sheet, front and back on second sheet ).
Item # 10 - 7 - 12 Cost >>$2.00 S & H *** U.S.A. >> $2.00
